Molex Connectors in South Africa

Molex has been making connectors for more than 80 years, and the name is close to a generic term on the bench: plenty of engineers say molex when they mean a wire-to-board connector. The real catalogue is much larger than that one part. It covers wire-to-board and board-to-board connectors, FFC and FPC connectors, I/O connectors, crimp terminals, and the finished cable assemblies built from them, across consumer, industrial, automotive and data applications.

TRX Electronics supplies genuine Molex parts to South African engineers and procurement teams. Connectors are easy to get wrong when sourcing, because the housing, the terminal and the crimp tooling all have to match, so we order through authorised channels and can help confirm you are quoting the right combination.

The Molex range

Most local demand sits in a few families. The Mini-Fit and Micro-Fit power connectors are everywhere in equipment wiring. The KK series is a long-standing wire-to-board standard. Pico-Clasp, PicoBlade and SlimStack cover the compact and board-to-board end, where space on a crowded PCB is tight, a trade-off we get into in our article on high-density board-to-board connector design.

Molex also supplies a large range of crimp terminals and the cable assemblies made from them. If you are matching a housing to the correct terminal and tool, send us the series and we will help line up the full set. You can also browse the wider product range.

Sourcing Molex through TRX

A connector is only as good as its mating half and its terminals, so the practical risk in sourcing is a mismatched or counterfeit part that looks right but does not seat or hold. TRX works through TTI and Mouser, both authorised Molex distributors, so the housings, terminals and assemblies you receive are the genuine specified parts.

There is no minimum order, which suits prototype wiring as well as production. In-stock items ship quickly to Johannesburg, Cape Town, Durban and Pretoria, and for anything sourced to order we give a firm lead time up front.

Common questions

Does TRX stock Molex connectors?

We supply the Molex range through authorised distribution, including the Mini-Fit, Micro-Fit, KK and SlimStack families, along with crimp terminals and cable assemblies. Send the series or part number for an availability check.

Can TRX supply matching Molex terminals and housings?

Yes, and it is worth asking. A Molex connector is specified as a housing plus the correct terminal, and sometimes a particular crimp tool. Give us the connector series and we will help confirm the full set so nothing arrives incomplete.

Is there a minimum order for Molex parts?

No. You can order a small quantity for a prototype harness and scale up to production volumes later.

Get a quote

Working out a Molex connector for a current design? Contact TRX with the series or part numbers and we will sort out availability and lead time.

Related reading: maximising PCB real estate with high-density board-to-board solutions, comparing backplane connectors, and card edge connectors, sourced fast.